Clicking any heading in the main data area (at right) will scroll the page back to this top position. Use the following links to jump to the associated section in the main data. Blunting Effect Boring Comments Common Names Common Uses Countries of Distribution Cutting Resistance Distribution Overview Drying Defects Ease of Drying Environmental Profile Family Name Grain Heartwood Color Kiln Schedules Light-Induced Color Change Luster Nailing Natural Durability Numerical Data Odor Planing References Regions of Distribution Resin Content Resistance to Impregnation Resistance to Splitting Sapwood Color Scientific Name Silica Content Strength Properties Texture Toxicity Trade Name Tree Identification Turning Veneering Qualities		Scientific Name Campnosperma auriculata Trade Name Terentang Family Name Anacardiaceae Common Names Arrida, Karamati, Kelinting, Melumut, Napan, Serantang, Serentang, Terentang, Toemboes Regions of Distribution Oceania and S.E. Asia Countries of Distribution  [VIEW MAP] Indonesia, Malaysia Common Uses Balusters, Blockboard, Boat building (general), Boat building, Boxes and crates, Building construction, Building materials, Cabinetmaking, Canoes, Casks, Chairs, Chests, Coffins, Concealed parts (Furniture), Construction, Cutting surfaces, Desks, Dining-room furniture, Dowell pins, Dowells, Drawer sides, Drawing boards, Fine furniture, Floor lamps, Furniture , Furniture components, Furniture squares or stock, Furniture, Hardboards, Hatracks, Heavy construction, Interior construction, Interior trim, Kitchen cabinets, Lifeboats, Light construction, Living-room suites, Matchboxes, Matches, Millwork, Moldings, Novelties, Office furniture, Packing cases, Particleboard, Plywood corestock, Plywood, Pulp/Paper products, Radio - stereo - TV cabinets, Shipbuilding, Toys, Turnery Environmental Profile Generally secure within its natural habitat Data source is World Conservation Monitoring Center Very little threat to its environment Distribution Overview Malaysia and Indonesia. Heartwood Color Pale red to pink Greenish to greyish Pink grey Golden brown with a reddish cast Darkens upon exposure Brown Sapwood Color Color not distinct from heartwood Paler than heartwood Grain Interlocked Figure Rays (figure) Weak (figure) Texture Fine Very fine Even textured Luster Dull Slightly lustrous Non-lustrous Lustrous Natural Durability Non durable Sapwood is susceptible to wood staining fungal attack Susceptible to attack from termites (Isoptera) Susceptible to marine borer attack Susceptible to attack by marine borers and termites Sapwood prone to stain Resistant to attack from powder post (Lyctid & Bostrychid) beetles Perishable Odor No specific smell or taste Silica Content Contains silica Resin Content Contains resin Machining operations may be affected by resins. Light-Induced Color Change Darker Toxicity Sap from bark can cause severe itching and urticaria in some individuals Dermatitic effects A chemical is contained in sap from tha bark which can cause severe itching and urticaria in some Kiln Schedules Drying (speed) is fast Drying Defects No surface checking Moderate spring/bow Special attention required Slight spring/bow Sapwood liable to stain No end splitting Moderate end spitting Moderate cupping Use proper precautions to prevent splitting and bowing Ease of Drying Special attention required Little degrade if dried properly Easy Dries at a fairly rapid rate Weight down stacks to minimize degrade Tree Identification Bole/stem form is buttressed Comments Abnormal Wood Tissue - Reaction wood, which can adversely affect machining and other properties may be present. Reaction wood may be present Blunting Effect Slight effect Blunting effect on machining is slight Boring Easy Cutting Resistance Cutting Resistance with dry wood is easy Cutting Resistance with dry wood is difficult Low resistance Cutting Resistance with green wood is easy Fine resinous sawdust may clog saw teeth Nailing Holds nails well Planing Does not plan to a good finish Easy to plane Tension in wood may result in woolly quartersawn surfaces. Planed surfaces are without luster Resistance to Impregnation Heartwood is permeable Heartwood is moderately resistant Sapwood is moderately treatable Resistance to Splitting Good Turning Turning qualities are poor Easy to turn Veneering Qualities Easy to cut Strength Properties Density (dry weight) = 23-30 lbs/cu. ft. Shrinkage, Tangential = very small Weight = light Toughness-Hammer drop (Impact Strength) = very low Surfaces may dent or scratch easily Surfaces may dent easily Shrinkage, Volumetric = small Shrinkage, Tangential = small Max. crushing strength = low Hardness (side grain) = very soft Compression strength (parallel to grain) = low Bending strength (MOR) = low Bending strength of the species in the air-dry condition (about 12 percent moisture content) is considered low - much lower than Teak, for example. Maximum crushing strength, or compression strength parallel to grain, is low. It is weaker than Mahogany or Teak. The wood is soft, and surfaces may dent easily. It also does not wear well, and mars easily. The wood is light in weight. The density is average, or medium Numerical Data Item Green Dry English Bending Strength 4343 6004 psi Crushing Strength 172 314 psi Density 24 lbs/ft3 Hardness 327 lbs Impact Strength 13 15 inches Maximum Crushing Strength 2210 3624 psi Shearing Strength 1076 psi Static Bending 2322 3119 psi Stiffness 813 1000 1000 psi Work to Maximum Load 4 5 inch-lbs/in3 Specific Gravity 0.26 0.28 Weight 24 21 lbs/ft3 Radial Shrinkage 2 % Tangential Shrinkage 5 % Volumetric Shrinkage 8 % Item Green Dry Metric Bending Strength 305 422 kg/cm2 Crushing Strength 12 22 kg/cm2 Density 384 kg/m3 Hardness 148 kg Impact Strength 32 38 cm Maximum Crushing Strength 155 254 kg/cm2 Shearing Strength 75 kg/cm2 Static Bending 163 219 kg/cm2 Stiffness 57 70 1000 kg/cm2 Work to Maximum Load 0.28 0.35 cm-kg/cm3 Specific Gravity 0.26 0.28 Weight 384 336 kg/m3 Radial Shrinkage 2 % Tangential Shrinkage 5 % References Desch, H.E. 1957. Manual of Malayan Timbers. Malayan Forest Records, 28(30): 310-319. Desch, H.E.,1954,Manual of Malayan Timbers (2 vols,Malayan Forest Records,no.15 Kartasujana, I., Martawijaya, A.,1973,Commercial Woods of Indonesia,Forest Products Research Institute, Department Pertanian, Bogor Indonesia,Report No.3 Keating, W.G., Bolza, E.,1982,Characteristics properties and uses of timbers. South East Asia, Northern,Australia and the Pacific,C.S.I.R.O. Div. Chemical Technology,Inkata Press,1 Lee, Y.H., Lopez, D.T.,1968,The Machining Properties of some Malayan Timbers,Malayan Forester,3,pp194-210 Menon, P.K.B.,1959,The wood anatomy of Malayan timbers: commercial timbers, 3. Light,hardwoods,Malaysian Forest Research Institute Kepong, Research Pamplet, No. 27. Smythies, B.E.,1965,Common Sarawak Trees,Borneo Literature Bureau Stadelman, R.C.,1966,Forests of South-East Asia,Wimmer Bros., Memphis Tennessee Thomas, A.V.,1954,Malayan Timbers - Bintangor, geronggang, terentang,Malayan Forest Service Trade Leaflet,no.12 WCMC. 1992. Conservation Status Listing - Trees and Timbers of the World. World Conservation Monitoring Center-Plants Programme, Cambridge, CB3 ODL, United Kingdom.